Katere druge oblike datotek lahko ustvarim s knjižnico C++?

Podpiramo različne formate izhodnih datotek, vključno s PDF, DOC, DOCX, ODT, RTF, HTML, Markdown, DOC, PNG, JPG, TIFF, WPS, TXT in številnimi drugimi. Namestite Aspose.Words for C++ Dodajte referenco knjižnice (uvozite knjižnico) svojemu C++ projektu Ustvari nov DOC dokument Pokličite metodo Save() in posredujte ime datoteke Dobite rezultat kot ločeno datoteko

Ali vaša knjižnica C++ podpira programsko izdelavo DOC?

Naša knjižnica C++ omogoča razvijalcem, da programsko ustvarijo DOC iz nič

Kako uporabiti API za izdelavo DOC?

Samo uporabite primer kode v C++.

Ustvari DOC Z Uporabo C++

Naredite DOC v C++ programsko

Z našo knjižnico C++ lahko razvijalci preprosto ustvarijo DOC iz nič. Za to morajo razvijalci C++ izvesti le nekaj korakov:

Dodajte ime datoteke
Začnite ustvarjati DOC dokument z uporabo C++
Shranite izhodno DOC datoteko

Omeniti velja, da naj bi prazen dokument tehnično vseboval en odstavek, tako da boste, ko programsko ustvarite DOC dokument, dobili točno to osnovno strukturo dokumenta.

Upoštevajte, da lahko takoj dodate vsebino v novo ustvarjeno DOC datoteko. Tako ne boste dobili le praznega dokumenta, temveč dokument s potrebno vsebino. Za več informacij o urejanju dokumenta glejte stran Urejanje.

Ustvarite DOC v C++

Ta knjižnica C++ vam omogoča programsko ustvarjanje DOC dokumentov. Preizkusite našo zmogljivo funkcionalnost in si oglejte, kako ustvariti DOC v nekaterih formatih z naslednjim primerom:

Ustvarite novo DOC z uporabo C++

Izhodni format

S seznama izberite ciljno obliko

Zaženi kodo

dotnet add package Aspose.Words.Cpp

Kopirati

				
				
				
				
		
using namespace Aspose::Words;

auto doc = MakeObject<Document>();
auto builder = MakeObject<DocumentBuilder>(doc);

auto font = builder->get_Font();
font->set_Name(u"Courier New");
font->set_Color(System::Drawing::Color::get_Blue());
font->set_Size(36);
font->set_HighlightColor(System::Drawing::Color::get_Yellow());

builder->Write(u"Morbi enim nunc faucibus a.");

doc->Save(u"Output.doc");

                                    using namespace Aspose::Words;

auto doc = MakeObject<Document>();
auto builder = MakeObject<DocumentBuilder>(doc);

auto firstRun = MakeObject<Run>(doc, u"Proin eros metus, sagittis sed. ");
auto secondRun = MakeObject<Run>(doc, u"Morbi enim nunc faucibus a.");
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(firstRun);
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(secondRun);

builder->MoveTo(secondRun);
builder->StartBookmark(u"Aspose bookmark");
// Če je NextSibling nič, je to najverjetneje zadnji Run v odstavku.
if (secondRun->get_NextSibling() != NULL)
    builder->MoveTo(secondRun->get_NextSibling());
else
    builder->MoveTo(secondRun->get_ParentParagraph());
builder->EndBookmark(u"Aspose bookmark");

doc->Save(u"Output.doc");

                                    using namespace Aspose::Words;

auto doc = MakeObject<Document>();
auto builder = MakeObject<DocumentBuilder>(doc);

auto firstRun = MakeObject<Run>(doc, u"Proin eros metus, sagittis sed. ");
auto secondRun = MakeObject<Run>(doc, u"Morbi enim nunc faucibus a.");
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(firstRun);
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(secondRun);

builder->MoveTo(secondRun);
builder->StartBookmark(u"Aspose bookmark");
// Če je NextSibling nič, je to najverjetneje zadnji Run v odstavku.
if (secondRun->get_NextSibling() != NULL)
    builder->MoveTo(secondRun->get_NextSibling());
else
    builder->MoveTo(secondRun->get_ParentParagraph());
builder->EndBookmark(u"Aspose bookmark");

auto saveOptions = MakeObject<PdfSaveOptions>();
saveOptions->get_OutlineOptions()->get_BookmarksOutlineLevels()->Add(u"Aspose bookmark", 1);

doc->Save(u"Output.doc", saveOptions);

                    
using namespace Aspose::Words;

auto doc = MakeObject<Document>();

auto run = MakeObject<Run>(doc, u"Proin eros metus, sagittis sed.");
auto para = doc->get_FirstSection()->get_Body()->get_FirstParagraph();
para->AppendChild(run);

auto comment = MakeObject<Comment>(doc, u"John Doe", u"JD", System::DateTime::get_Today());
comment->SetText(u"Quisque fringilla leo.");

auto commentRangeStart = MakeObject<CommentRangeStart>(doc, comment->get_Id());
auto commentRangeEnd = MakeObject<CommentRangeEnd>(doc, comment->get_Id());

run->get_ParentNode()->InsertBefore(commentRangeStart, run);
run->get_ParentNode()->InsertAfter(commentRangeEnd, run);
commentRangeEnd->get_ParentNode()->InsertAfter(comment, commentRangeEnd);

comment->AddReply(u"Jane Doe", u"JD", System::DateTime::get_Now(),
    u"Pellentesque vel sapien justo.");

doc->Save(u"Output.doc");

                                    using namespace Aspose::Words;

auto doc = MakeObject<Document>();
auto builder = MakeObject<DocumentBuilder>(doc);

auto firstRun = MakeObject<Run>(doc, u"Proin eros metus, sagittis sed. ");
auto secondRun = MakeObject<Run>(doc, u"Morbi enim nunc faucibus a.");
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(firstRun);
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(secondRun);

builder->MoveTo(secondRun);
builder->StartBookmark(u"Aspose bookmark");
// Če je NextSibling nič, je to najverjetneje zadnji Run v odstavku.
if (secondRun->get_NextSibling() != NULL)
    builder->MoveTo(secondRun->get_NextSibling());
else
    builder->MoveTo(secondRun->get_ParentParagraph());
builder->EndBookmark(u"Aspose bookmark");

doc->Save(u"Output.doc");

                                    using namespace Aspose::Words;

auto doc = MakeObject<Document>();
auto builder = MakeObject<DocumentBuilder>(doc);

auto firstRun = MakeObject<Run>(doc, u"Proin eros metus, sagittis sed. ");
auto secondRun = MakeObject<Run>(doc, u"Morbi enim nunc faucibus a.");
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(firstRun);
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(secondRun);

builder->MoveTo(secondRun);
builder->StartBookmark(u"Aspose bookmark");
// Če je NextSibling nič, je to najverjetneje zadnji Run v odstavku.
if (secondRun->get_NextSibling() != NULL)
    builder->MoveTo(secondRun->get_NextSibling());
else
    builder->MoveTo(secondRun->get_ParentParagraph());
builder->EndBookmark(u"Aspose bookmark");

auto saveOptions = MakeObject<PdfSaveOptions>();
saveOptions->get_OutlineOptions()->get_BookmarksOutlineLevels()->Add(u"Aspose bookmark", 1);

doc->Save(u"Output.doc", saveOptions);

                    
using namespace Aspose::Words;

auto doc = MakeObject<Document>();
auto builder = MakeObject<DocumentBuilder>(doc);

auto firstRun = MakeObject<Run>(doc, u"Proin eros metus, sagittis sed. ");
auto secondRun = MakeObject<Run>(doc, u"Morbi enim nunc faucibus a.");
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(firstRun);
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(secondRun);

builder->MoveTo(secondRun);
builder->StartBookmark(u"Aspose bookmark");
// Če je NextSibling nič, je to najverjetneje zadnji Run v odstavku.
if (secondRun->get_NextSibling() != NULL)
    builder->MoveTo(secondRun->get_NextSibling());
else
    builder->MoveTo(secondRun->get_ParentParagraph());
builder->EndBookmark(u"Aspose bookmark");

doc->Save(u"Output.doc");

                                    using namespace Aspose::Words;

auto doc = MakeObject<Document>();
auto builder = MakeObject<DocumentBuilder>(doc);

auto firstRun = MakeObject<Run>(doc, u"Proin eros metus, sagittis sed. ");
auto secondRun = MakeObject<Run>(doc, u"Morbi enim nunc faucibus a.");
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(firstRun);
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(secondRun);

builder->MoveTo(secondRun);
builder->StartBookmark(u"Aspose bookmark");
// Če je NextSibling nič, je to najverjetneje zadnji Run v odstavku.
if (secondRun->get_NextSibling() != NULL)
    builder->MoveTo(secondRun->get_NextSibling());
else
    builder->MoveTo(secondRun->get_ParentParagraph());
builder->EndBookmark(u"Aspose bookmark");

doc->Save(u"Output.doc");

                                    using namespace Aspose::Words;

auto doc = MakeObject<Document>();
auto builder = MakeObject<DocumentBuilder>(doc);

auto firstRun = MakeObject<Run>(doc, u"Proin eros metus, sagittis sed. ");
auto secondRun = MakeObject<Run>(doc, u"Morbi enim nunc faucibus a.");
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(firstRun);
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(secondRun);

builder->MoveTo(secondRun);
builder->StartBookmark(u"Aspose bookmark");
// Če je NextSibling nič, je to najverjetneje zadnji Run v odstavku.
if (secondRun->get_NextSibling() != NULL)
    builder->MoveTo(secondRun->get_NextSibling());
else
    builder->MoveTo(secondRun->get_ParentParagraph());
builder->EndBookmark(u"Aspose bookmark");

auto saveOptions = MakeObject<PdfSaveOptions>();
saveOptions->get_OutlineOptions()->get_BookmarksOutlineLevels()->Add(u"Aspose bookmark", 1);

doc->Save(u"Output.doc", saveOptions);

                    
using namespace Aspose::Words;

auto doc = MakeObject<Document>();
auto builder = MakeObject<DocumentBuilder>(doc);

auto shape = builder->InsertChart(ChartType::Pie, 432, 252);
auto chart = shape->get_Chart();
chart->get_Title()->set_Text(u"Demo Chart");

chart->get_Series()->Clear();
chart->get_Series()->Add(u"Series 1",
    MakeArray<String>({ u"Category1", u"Category2", u"Category3" }),
    MakeArray<double>({ 2.7, 3.2, 0.8 }));

doc->Save(u"Output.doc");

                                    using namespace Aspose::Words;

auto doc = MakeObject<Document>();
auto builder = MakeObject<DocumentBuilder>(doc);

auto firstRun = MakeObject<Run>(doc, u"Proin eros metus, sagittis sed. ");
auto secondRun = MakeObject<Run>(doc, u"Morbi enim nunc faucibus a.");
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(firstRun);
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(secondRun);

builder->MoveTo(secondRun);
builder->StartBookmark(u"Aspose bookmark");
// Če je NextSibling nič, je to najverjetneje zadnji Run v odstavku.
if (secondRun->get_NextSibling() != NULL)
    builder->MoveTo(secondRun->get_NextSibling());
else
    builder->MoveTo(secondRun->get_ParentParagraph());
builder->EndBookmark(u"Aspose bookmark");

doc->Save(u"Output.doc");

                                    using namespace Aspose::Words;

auto doc = MakeObject<Document>();
auto builder = MakeObject<DocumentBuilder>(doc);

auto firstRun = MakeObject<Run>(doc, u"Proin eros metus, sagittis sed. ");
auto secondRun = MakeObject<Run>(doc, u"Morbi enim nunc faucibus a.");
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(firstRun);
doc->get_FirstSection()->get_Body()->get_FirstParagraph()->AppendChild(secondRun);

builder->MoveTo(secondRun);
builder->StartBookmark(u"Aspose bookmark");
// Če je NextSibling nič, je to najverjetneje zadnji Run v odstavku.
if (secondRun->get_NextSibling() != NULL)
    builder->MoveTo(secondRun->get_NextSibling());
else
    builder->MoveTo(secondRun->get_ParentParagraph());
builder->EndBookmark(u"Aspose bookmark");

auto saveOptions = MakeObject<PdfSaveOptions>();
saveOptions->get_OutlineOptions()->get_BookmarksOutlineLevels()->Add(u"Aspose bookmark", 1);

doc->Save(u"Output.doc", saveOptions);

                    

				Zaženi kodo
			

To kodo lahko prosto kopirate in jo uporabite v kateri koli ustrezni namen

Kako narediti DOC v C++

Namestite Aspose.Words for C++
Dodajte referenco knjižnice (uvozite knjižnico) svojemu C++ projektu
Ustvari nov DOC dokument
Pokličite metodo Save() in posredujte ime datoteke
Dobite rezultat kot ločeno datoteko

Knjižnica C++ za ustvarjanje DOC

Obstajajo tri možnosti za namestitev Aspose.Words for C++ v okolje razvijalca. Izberite tistega, ki ustreza vašim potrebam, in sledite navodilom po korakih:

Namestite paket NuGet. Glejte dokumentacijo
Namestite knjižnico s Package Manager Console v Visual Studio IDE
Ročno namestite knjižnico s programom Windows Installer

Sistemske zahteve

To knjižnico C++ lahko uporabite za razvoj programske opreme v Microsoft Windows, Linux in macOS:

GCC >= 6.3.0 in Clang >= 3.9.1 sta potrebna za Linux
Xcode >= 12.5.1, za macOS sta potrebna Clang in libc++

Če razvijate programsko opremo za Linux ali macOS, preverite informacije o dodatnih odvisnostih knjižnic (odprtokodni paketi fontconfig in mesa-glu) v dokumentaciji izdelka.

Ustvarite lahko dokumente v drugih oblikah datotek: